How do you remove olives, rings or ferrules from copper water pipes, without damaging the pipe?
The answer is with olive cutters.
But what are olive cutters? Why are they different from olive pullers? And are they the same as an olive splitter? In this blog, we’re going to tell you all you need to know about this handy tool, so you can get your hands on the right pair for you.
Effortless olive cutting, over and over
With two sharp cutting blades, an olive cutter, or an olive splitter, is used to slice off an olive, ring, or ferrule from around a copper water pipe.
In short, if you need to remove olives from copper pipes, then olive cutters are the tool for you.
Used in compression fittings on copper water pipes, olives, rings or ferrules can be tricky to remove. But not anymore - an olive cutter is the quickest and most reliable way to remove them without damaging the copper tube.
In other words? They’re a plumber’s best mate. Especially when they’re nimble enough to use over and over again. Essentially, they make a tough job effortless. Handy!
And you can choose from a variety of olive cutters right here.
But why are they different from an olive puller?
Olive pullers do what their name suggests – they pull an olive from a pipe. But as olive-removing methods go, this isn’t the best of them. By pulling, rather than cutting, an olive puller can cause more harm than good. In addition, they’re time-consuming tools and can be tricky to use in tight spaces.
At the end of the day, the easiest way to remove an olive is with an olive cutter. Available in different sizes to match differing pipe diameters, they are more reliable and more accurate than any other olive remover. Perhaps best of all, they do not deform a copper pipe, as an olive puller is prone to do.
What are the different types of olive cutter?
Let’s get straight to it. Maun offers two different types of olive cutter.
The more commonly used version is a plier-type tool. Manufactured in high-quality steel, its cutting edges are hardened and tempered to HRC 45. For minimal effort, the tool multiplies the hand force applied by 15 times. It also features comfort grips and is available in two sizes, 15 mm, and 22 mm.
But for tighter spaces, Maun offers a unique, screw-type olive cutter. This benefits from the same high-quality steel construction, with cutting edges hardened and tempered to HRC 45. The tool is easy to use. Just centre the olive on the tool and a few quick turns of the handle will split the olive from the pipe. Again, this tool is available in two sizes, 15 mm, and 22 mm.
Why Maun olive cutters?
The product of more than 75 years of tool-making experience, our olive cutters are designed for minimal effort and accurate cutting without damage or swarf.
So, what are you waiting for? Get your hands on a pair of our tried and tested cutters today. You can browse our selection here.